Commonly used command: DRAWORDER

The DRAWORDER command is used to change the drawing order of images or other objects.

How to access the Draworder command:

* When using GstarCAD Classic workspace, find Tools > Draw order > Bring to Front, as shown in the following picture,

* We can enter: DRAWORDER, as shown in the following picture,

How to use the draworder command

After executing the command, we’re prompted to select objects, as shown in the following picture,

We can select objects and press enter key, then we’ll be prompted to enter object ordering option, as shown in the following picture,

The Draworderctl system variable

The draworderctl system variable could control default display of overlapped objects. The TEXTOFRONT command could place all text and annotations in drawing in front of other objects and the HATCHTOBACK command could place all hatch objects to the back of other objects.

The four options

Above objects:
Move the selected objects and place them above the specified reference objects.
Under objects:
Move the selected objects and place them under the specified reference objects.
Front:
Move the selected objects to the front of objects in drawing.
Back:
Move the selected objects to the back of objects in drawing.
When change drawing order (display order and plot order) of multiple objects, the relative drawing order of selected objects will remain unchanged.


Discover more from Gstarsoft's Blog

Subscribe to get the latest posts sent to your email.

GstarCAD Blog

www.gstarcad.net

Related Posts

How to Fix Missing Xrefs in a DWG File

You open a DWG and the drawing looks strangely empty. The floor plan is there, but the structural grid is gone. Or the title block remains while an entire referenced…

Why Is My DWG File So Large and How to Reduce It Safely

A DWG file can grow far beyond what its visible geometry seems to justify. Common causes include unused definitions, duplicate objects, imported content, empty text, zero-length geometry, registered application data,…

One thought on “Commonly used command: DRAWORDER”

Leave a Reply

Don't Miss out

How to Fix Missing Xrefs in a DWG File

  • November 19, 2026
How to Fix Missing Xrefs in a DWG File

Why Is My DWG File So Large and How to Reduce It Safely

  • November 11, 2026
Why Is My DWG File So Large and How to Reduce It Safely

What Is a DXF File? A Practical Guide to CAD Exchange

  • November 4, 2026
What Is a DXF File? A Practical Guide to CAD Exchange

What Is a DWG File? An Easy Guide for CAD Beginners

  • October 30, 2026
What Is a DWG File? An Easy Guide for CAD Beginners

What’s New in GstarRender: AI Architectural Visualization from Concept to Video

  • October 29, 2026
What’s New in GstarRender: AI Architectural Visualization from Concept to Video

GstarCAD Deep Dive: What’s New in Batch Plotting for 2027?

  • October 20, 2026
GstarCAD Deep Dive: What’s New in Batch Plotting for 2027?

Discover more from Gstarsoft's Blog

Subscribe now to keep reading and get access to the full archive.

Continue reading