How to snap to points using X-coordinate and Y-coordinate
Object Snap is a very commonly used tool to help design and locate using existing points.
Object Snap is a very commonly used tool to help design and locate using existing points.
There are mainly two reasons for the problem: the selected objects have too many grips, or the grip display is turned off.
The HELIX command is one of most common commands that creates a 2D helix or 3D spring. This post is all about the basics about HELIX commad, which is very helpful for newbies.
DWGPROPS command is used to set and display the file properties of the current drawing. The popped up Drawing Properties dialog box helps users design more conveniently and save time.
Have you ever come across the issue: When you’re doing the Rotate command and have specified the base point and 90 degrees, but it is not actually 90 degrees to the point you’ve chosen?
Have you ever encounter an issue where you can’t draw outside of limits in your CAD? Or have you ever wondered if you can set up drawing limits for your drawing?
By default, the CAD system display many prompt messages to help users design more efficiently. When you hover the cursor over, you will get the prompt messages. But you can turn them off if you think they are not necessary.
From the Dimension Style Manager, we can not only compare the difference between selected dimension style and the current text style, but also two different dimension styles.
The dimension in CAD won’t show units whether we select Centimeters or Meters from “Units to scale inserted content”. To add units to dimension in CAD, we need to do settings in the “Dimension Style Manager ”
Want to create symmetric graphics? Try Mirror command. A good command of Mirror command will help speed up the process of drawing.