How to create a solid 3D box with BOX Command

The BOX command is used to create solid 3D boxes, that is to say, cubes.

In this previous post, https://blog.gstarcad.net/how-to-use-extrude-command-to-create-3d-objects/, we’ve talked about how to turn 2D objects into 3D objects using EXTRUDE Command. By using BOX Command, we can directly create boxes very conveniently.

How to access the BOX Command?

  • When using 2D Drafting workspace, find 3D tab > Modeling panel > Box command, shown as below,
  • When using GstarCAD Classic workspace, find Draw > Modeling > Box, shown as below,
  • Or just enter BOX, shown as below,

After executing the BOX command, we are prompted to specify first corner or center, as shown in the following picture,

After specifying first corner, we then are prompted to specify other corner, as shown in the following picture,

Please note that this plane made by the specified first corner and other corner is parallel to XY plane of current UCS.

We then can specify the height of the box we want to create by inputting Z value, which could either be positive or negative, as shown in the following picture,

Check the video for more info about Box command:


Discover more from Gstarsoft's Blog

Subscribe to get the latest posts sent to your email.

GstarCAD Blog

www.gstarcad.net

Related Posts

How to Fix Missing Xrefs in a DWG File

You open a DWG and the drawing looks strangely empty. The floor plan is there, but the structural grid is gone. Or the title block remains while an entire referenced…

Why Is My DWG File So Large and How to Reduce It Safely

A DWG file can grow far beyond what its visible geometry seems to justify. Common causes include unused definitions, duplicate objects, imported content, empty text, zero-length geometry, registered application data,…

Leave a Reply

Don't Miss out

How to Fix Missing Xrefs in a DWG File

  • November 19, 2026
How to Fix Missing Xrefs in a DWG File

Why Is My DWG File So Large and How to Reduce It Safely

  • November 11, 2026
Why Is My DWG File So Large and How to Reduce It Safely

What Is a DXF File? A Practical Guide to CAD Exchange

  • November 4, 2026
What Is a DXF File? A Practical Guide to CAD Exchange

What Is a DWG File? An Easy Guide for CAD Beginners

  • October 30, 2026
What Is a DWG File? An Easy Guide for CAD Beginners

What’s New in GstarRender: AI Architectural Visualization from Concept to Video

  • October 29, 2026
What’s New in GstarRender: AI Architectural Visualization from Concept to Video

GstarCAD Deep Dive: What’s New in Batch Plotting for 2027?

  • October 20, 2026
GstarCAD Deep Dive: What’s New in Batch Plotting for 2027?

Discover more from Gstarsoft's Blog

Subscribe now to keep reading and get access to the full archive.

Continue reading